Extended Detectors from InfraTec

TypeLIE, LIM: Detectors with standard design
LME, LMM: Detectors with reduced microphonic effect
LRE, LRM: Detectors with micromechanical frame
LFP: Detectors with tunable Fabry‐Pérot filter

HousingTO18, TO46: 5.4 mm in diameter
TO5, TO39: 9.2 mm in diameter
TO8: 15.2 mm in diameter
The number following the hyphen indicates the number of pins.

ChannelNumber of measuring channels

Aperture (mm)Size of the circular or rectangular aperture through which radiation hits the sensitive elements.

Operating modesSize of the circular or rectangular aperture through which radiation hits the sensitive elements.

JFET/OpAmpIntegrated signal condition like integrated junction field effect transistors (JFET) for detectors in voltage mode or integrated operational amplifiers (OpAmp) for detectors in current mode.

Thermal CompensationA pyroelectric detector is sensitive to changes in temperature. Changes in ambient temperature have an influence on the measurement signal and shifts the operating point. This effect reduces a thermal compensation. Therefore, each pyroelectric element gets an additional optically inactive element, which compensates for unwanted currents.

Low MicroPatented micromechanical chip attachment (LowMicro) by InfraTec to reduce the effects of interfering impact sounds.

Detectivity*As a key parameter, the specific detectivity D* characterizes the signal-to-noise ratio of infrared detectors.